Surron Black Friday Deals on Brake Accessories

Surron Black Friday deals cover every brake accessory on this page: caliper hardware, titanium bolts, bleed tools and foot brake parts for the Surron Ultra Bee, Surron Light Bee, Talaria and Eride Pro. These are the small parts that keep a brake system working after a crash, a rebuild or a pad change. Stock up now and keep spares on the shelf.

Black Friday pricing

• 10% off sitewide. Every order.
• 20% off orders of $450 or more.
• 25% off orders of $650 or more.
• 30% off orders of $1,000 or more.

The tiers count your whole cart. Pair accessories with a brake kit or other upgrades to reach the next tier.

Ultra Bee caliper hardware and rebuild parts

These fit the Ultra Bee caliper on the Surron Ultra Bee and on any bike running an Ultra Bee brake kit.

• Surron Ultra Bee Caliper Hardware Kit: Both slider poles and both rubber sliders for the caliper and its bracket. Replaces damaged sliders and slider poles in one order.
• Surron Ultra Bee Brake Caliper Rubber Sliders: The two rubber sliders on their own, caliper and bracket. Also fits the Stark Varg front caliper.
• Surron Ultra Bee Brake Caliper Pad Pin: OEM replacement pin that holds the pads in the caliper. Fits front and rear. One pin per order.
• Surron Ultra Bee Brake Caliper Retaining Clip Spring: Replacement pad retaining spring for the front and rear calipers.
• Surron Ultra Bee Brake Caliper Brass Pad Retaining Clip: Replacement brass pad retaining clip for the Ultra Bee caliper.
• Copper Crush Washer Replacement Kit M10: Four heavy copper washers, 16mm OD, 10mm ID, 1.5mm thick. Two per caliper, so one kit does two calipers.
• Titanium Brake Caliper Bleed Screw: GR5 titanium bleeder in M8 x 1.25 thread pitch. Fits Ultra Bee brake kits, the Surron Ultra Bee and the Stark Varg.
• Brake Caliper Bleed Screw Rubber Cover: OEM replacement dust cap for the bleeder. Fits dirt bike and motorcycle sized calipers.
• Surron Ultra Bee Front Brake Caliper Bracket: Cast aluminum bracket that bolts to the Surron Ultra Bee fork mounting holes.
• Talaria Caliper Bracket Spacer: Sits between the caliper bracket and the swingarm on a Talaria X3, MX3 or MX4 running an Ultra Bee brake kit. Replaces a lost spacer.

Banjo bolts, lines and bleeding

• M10 x 1.25 Titanium Banjo Bolt, Grade 5 (2 pack): Coarse pitch for Nissin, Surron and Talaria hardware. About 45% lighter than steel, drilled for safety wire, copper crush washers included.
• M10 x 1.00 Titanium Banjo Bolt, Grade 5 (2 pack): Fine pitch for Euro spec master cylinders and calipers. Same Grade 5 titanium, safety wire holes and fresh washers.
• Surron Foot Brake Banjo Adapter: CNC 6061-T6 aluminum adapter that connects a Hope Tech brake line to an M10 banjo on Surron, Talaria and Eride Pro SS foot brakes.
• Hope Tech Banjo Connector Ends: Genuine Hope Tech replacement banjo ends for Tech 3, Tech 4, Race Evo, Mono and Moto V2 brakes.
• Ultra Bee Brake Bleed Kit With Check Valve: Bleeds any caliper with an M8 bleeder screw. No syringe. Your lever pushes the fluid and the one-way valve keeps air from flowing back.
• E-moto Rear Rotor Bolts Low Profile: Six M6 x 1.00 stainless bolts with low heads. Stops the rubbing stock bolts cause with upgraded rotors.

Master cylinder and foot brake parts

• Surron Ultra Bee Brake Reservoir Caps: CNC 6061-T6 aluminum covers that replace the stock cast caps, with stainless countersunk bolts. Fits OEM Surron Ultra Bee and Ultra Bee brake master cylinders.
• Surron Ultra Bee Brake Master Cylinder Clamp: 6061-T6 aluminum clamp set, two per order. Fits the Surron Ultra Bee and Ultra Bee brake kits on Surron, Talaria and Eride Pro.
• Surron Foot Brake Extension: Moves the foot brake lever closer to your boot for easier reach while standing. Installs in 5 to 10 minutes.
• Folding Foot Brake Peg: Folds in on a crash instead of snapping the foot brake lever. 6061-T6 aluminum with screw in stainless grippers.
• Surron Foot Brake Spring Replacement: Replacement foot brake spring for Surron, Talaria and Eride Pro.
• Surron Foot Brake Master Cylinder Clevis Pin and Cotter Pin: OEM spec clevis pin, cotter pin and washer for the foot brake master cylinder.

Shop the full brake lineup

This page holds the Black Friday accessory picks. The full year round range lives on E-moto Brake Accessories. Complete conversions are on Ultra Bee Brake Kits. Rotors, pads, lines and master cylinders are on Surron Brakes. Parts made for the bike itself are on Surron Ultra Bee Parts.

Black Friday Brake Accessories FAQ

Do the caliper parts fit my Light Bee, Talaria or Eride Pro?

Only if the bike runs an Ultra Bee brake kit. The sliders, pins, clips and hardware kit are made for the Ultra Bee caliper. On the Surron Ultra Bee they fit the stock brakes, all years.

Do these parts fit the Surron LB2?

No. The Light Bee parts on this page do not fit the Surron LB2, which is a new frame and design. The bleed kit is the exception. It works on any caliper with an M8 bleeder screw, the LB2 included.

Which titanium banjo bolt do I need?

Match the thread in your caliper or master cylinder. M10 x 1.25 is the coarse pitch used on Nissin, Surron and Talaria hardware. M10 x 1.00 is the fine pitch used on Euro spec brakes like Brembo.

How do the Black Friday discount tiers work?

Every order takes 10% off. The rate climbs with your cart total: 20% at $450, 25% at $650 and 30% at $1,000. The tiers apply sitewide, so brake kits and other parts count toward the total.

Ships from USA!