Moto Brake Bleed Kit With Check-Valve FactoryZ

Full Brake bleeding kit for Surron, Talaria, Eride Pro Moto Brakes & Ultra Bee Brakes.

Specs:

• Fits: All Moto Style Brakes, Pitbike Brakes, Dirtbike Brakes, ETC
  
• Fits: ETM RTR Lite, Sport, Alpha, and XL (with Moto Brake)
• 2 fuel hose pieces
• 1 check-valve (to only allow fluid out of your caliper, and not let air back in)
• 4 hose clamps

How to Use:

1. Connect the fuel hose to the bleeder nipple on your caliper nipple then install the hose clamp to hold them together.
2. Crack open the nipple about .5-1 full turn so fluid can be sucked through with the syringe.
3. Be sure your master cylinder is full of fluid and watch it during this process, so you can continue to keep it full.
4. Slowly open the syringe pulling fluid and air out of your caliper.
5. Be sure to change the angle of the caliper and shake it around/vibrate it to move the air bubbles out the nipple.
6. Keep the nipple as the highest point in the system. Gravity will force the air bubbles out of the nipple.
7. Tighten the bleeder nipple all the way down and remove the fuel hose, enjoy your freshly bled system!

View the Full Step-by-Step Bleed Guide & Video Here

Ships From USA!