Yozma IN 10 Ultra Brake Hand Brake Kit, Pre-Bled

The Yozma IN 10 Ultra Bee hand brake kit upgrades your rear brake assembly to the Ultra Bee Caliper & master cylinder. This upgrade gives you real moto brake feel on your Yozma IN 10, making it brake like a real dirt bike. It ships pre-bled and ready to bolt-on and ride.

What's in the box?

• Pre-bled Ultra Bee Hand Brake assembly, Ultra Bee master cylinder, Ultra Bee Brake Caliper, Steel braided brake line
  
• Single caliper bracket, or optional dual caliper bracket to add our 
• All mounting hardware required for install
  

Specs:

• OEM Surron Ultra Bee hand brake master cylinder
• Steel braided custom brake line
• OEM UItra Bee Caliper or Custom FactoryZ Ultra Bee Caliper
• Dual & Single caliper bracket made from 6061-T6 aluminum
• Ships pre-bled with Motul DOT 5.1 brake fluid: high boiling point, ready to ride
• Uses your Soleil 01's stock 190mm rotor, so there is no rotor swap
  

Fits These Models:

• Yozma IN 10
  
• Strike Shadow 48V
• Strike Shadow 60V
• Strike Shadow 72V
• Valtinsu EM-5
• Valtinsu EM-5 Pro

 Ultra Bee Hand Brake Kit FAQ

Will this hand brake kit fit my Yozma / Strike / Valtinsu?

Yes. our Ultra Bee Hand Brake Kit is built for the Yozma IN 10, Strike Shadow, & Valtinsu EM-5. Our Ultra Bee Brake Kit bolts to the factory mounting points on all years. It uses your stock 190mm rotor. It is made for the  only.

Do I need any other parts to install it?

No. The kit is complete: pre-bled Ultra Bee master cylinder, steel braided line, Ultra Bee caliper, single or dual caliper bracket, and hardware. It uses your stock 190mm rotor, so nothing else is required.

Can I add a foot brake?

Yes, you can add our  if you select the dual caliper option at checkout. This would allow the use of 2 calipers, 1 for hand brake & 1 for foot brake. Giving you superior bike control in all conditions.

Single or dual caliper bracket: which do I need?

Single runs one rear caliper for a hand brake only setup. Dual mounts a second caliper so you can add a foot brake as well. Most riders run the dual. 

Is it really pre-bled and ready to ride?

Yes. It ships pre-bled with Motul DOT 5.1 fluid. Bolt it on, route the line, and ride. No cutting and no fabrication.

OEM Ultra Bee or Custom FactoryZ caliper: what is the difference?

Both are direct-fit and pre-bled. OEM Surron Ultra Bee is the factory caliper. Custom FactoryZ is our own machined and finished version.

Does it use a bigger rotor?

No. The foot brake kit runs your Soleil 01's stock 190mm rotor, so there is no rotor swap. A larger rotor is a separate brake upgrade.

Install Guide:

Bolt-on install, no cutting or fabrication. Watch the full step-by-step install below, and find every guide in our install video library. See all 

Ships from USA!