Tuttio Soleil 01 Ultra Brake Hand Brake Kit, Pre-Bled

The Tuttio Soleil 01 Ultra Bee hand brake kit upgrades youir rear brake assembly to the Ultra Bee Caliper & master cylinder. This upgrade gives you real moto brake feel on your Tuttio Soleil, making it brake like a real dirt bike. It ships pre-bled and ready to bolt-on and ride.

What's in the box?

• Pre-bled Ultra Bee Hand Brake assembly, Ultra Bee master cylinder, Ultra Bee Brake Caliper, Steel braided brake line
  
• Single caliper bracket, or optional dual caliper bracket to add our Tuttio Foot Brake Kit
• All mounting hardware required for install
  

Specs:

• OEM Surron Ultra Bee hand brake master cylinder
• Steel braided custom brake line
• OEM UItra Bee Caliper or Custom FactoryZ Ultra Bee Caliper
• Dual & Single caliper bracket made from 6061-T6 aluminum
• Ships pre-bled with Motul DOT 5.1 brake fluid: high boiling point, ready to ride
• Uses your Soleil 01's stock 190mm rotor, so there is no rotor swap
  

Fits These Models:

• Tuttio Soleil 01 (all years)

Tuttio Ultra Bee Hand Brake Kit FAQ

Will this hand brake kit fit my Tuttio Soleil 01?

Yes. our Tuttio Ultra Bee Hand Brake Kit is built for the Soleil 01 and bolts to the factory mounting points on all years. It uses your stock 190mm rotor. It is made for the Soleil 01 only.

Do I need any other parts to install it?

No. The kit is complete: pre-bled Ultra Bee master cylinder, steel braided line, Ultra Bee caliper, single or dual caliper bracket, and hardware. It uses your stock 190mm rotor, so nothing else is required.

Can I add a foot brake?

Yes, you can add our Tuttio Soleil 01 Foot Brake Kit if you select the dual caliper option at checkout. This would allow the use of 2 calipers, 1 for hand brake & 1 for foot brake. Giving you superior bike control in all conditions.

Single or dual caliper bracket: which do I need?

Single runs one rear caliper for a hand brake only setup. Dual mounts a second caliper so you can add a foot brake as well. Most riders run the dual. 

Is it really pre-bled and ready to ride?

Yes. It ships pre-bled with Motul DOT 5.1 fluid. Bolt it on, route the line, and ride. No cutting and no fabrication.

OEM Ultra Bee or Custom FactoryZ caliper: what is the difference?

Both are direct-fit and pre-bled. OEM Surron Ultra Bee is the factory caliper. Custom FactoryZ is our own machined and finished version.

Does it use a bigger rotor?

No. The foot brake kit runs your Soleil 01's stock 190mm rotor, so there is no rotor swap. A larger rotor is a separate brake upgrade.

Install Guide:

Bolt-on install, no cutting or fabrication. Watch the full step-by-step install below, and find every guide in our install video library. See all Tuttio Soleil 01 upgrades.

Ships from USA!

Updated ~ 07/01/2026