Couldn't load pickup availability
Get consistent braking without hesitation.
This rotor brings real bite to your emoto with a custom flame design that moves air across the braking surface and clears dust fast. The 2.3 millimeter thickness provides thermal mass. This allows for longer pulls without fading. It also works well with stock calipers, common MTB calipers, and moto style setups.
220mm diameter for consistent brake modulation and stronger braking force than stock 203mm rotors
2.3mm thickness for superior heat dissipation and consistent braking feel
Our custom flame design improves airflow and rids brake pad dust faster
Made from 12CR13 stainless steel
Matches the Light Bee front (44mm) and rear (54MM) bolt patterns
Surron Light Bee ( all years )
Eride Pro SS 1.0 / 2.0 / Pro S (DOES NOT FIT 3.0 or SR)
Ventus One
79Bike
Remove the wheel.
Warm each rotor bolt just enough to soften thread locker.
Remove bolts and lift the old rotor away.
Apply a light bead of blue thread locker to clean bolts.
Seat the new rotor and hand snug all bolts in a star pattern.
Torque each bolt to spec with a torque wrench.
Refit the wheel and spin to confirm clearance.
Install fresh pads and bed everything in with slow controlled stops.
Always use fresh pads for best bite and proper bedding.
If you run a moto brake bracket designed for a 240mm rotor, this 220mm size will not allows the pads to bite correctly, please purchase this 240MM Rotor for moto brakes!
Q: Does this fit the Ultra Bee
A: No. This version is for the Surron Light Bee.
Q: Will it rub in an MTB style caliper
A: Most modern calipers accept 2.3 millimeter rotors. Center your caliper and verify clearance.
Q: Do I need new pads
A: Highly recommended. New pads plus a proper bed in gives the strongest bite and least noise.
Q: What direction should the flame face
A: Look for the text lasered onto the rotor, the text should be facing you when you mount the rotor
