Surron Foot Lock Shift Lock Peg for Light Bee

Lock in and ride it out

If you like to lift the front and play on balance, this is the little part that makes a big difference. Our Surron foot lock keeps your shoe planted so you can work the brake and body position without slipping off. CNC cut from 6061 T6 aluminum, clean fit, takes hits, and installs in minutes.

Highlights

• CNC machined 6061 T6 aluminum bracket

• Secure peg surface for confident wheelies and balance work

• Includes hardware: 3 bolts and 2 spacers, 1 CNC peg, 1 shift lock bracket

• Direct fit for Surron Light Bee

• Smooth edges and a clean machined finish

• Ships fast from USA

What it does

Foot stays where you want it. More control when you’re on balance. Better leverage on the rear brake. Fewer saves with a dangling toe.

Specs

Compatibility

Built for the Surron Light Bee. Riders use it mainly for wheelies and balance practice. If you run aftermarket peg brackets it may sit higher then normal, but still functions the same.

Install Guide

1. put the bike on a stand or resting on its kickstand.

2. Remove the 2 bolts holding on your bash guard ( on left or right side depending which side you choose to mount the foot lock.

3. Unscrew the plastic cap on the end of the lock peg, put the shorter bolt into the peg and use an M6 Allen Key to tighten it into the bracket.
   
4. Then send the 2 longer bolts through the bracket and put the spacer over the threads sticking out on the other side of the bracket
   
   
5. hand tighten both bolts through your frame and into your bash guard.
   
   
6. Last make sure both bolts are torqued to spec and take it for a rip!

FAQs

Does this come with all hardware?
Yes. You get the peg, three bolts, and two spacers.

Left or right side?
Most riders run it on the shifter side. However our Shift Lock is made to be universal and can be mounted on either side!

Any special tools?
You only need a 5MM & 6MM Allen Key for this install!

Will it scratch the frame?
Installed correctly with the spacers it sits solid. Always check for rubbing after your first ride.

What bikes does it fit?
It’s made for the Surron Light Bee. If you need a version for other platforms, shoot us a message and we’ll point you right!

Ships from USA.