Couldn't load pickup availability
Copper sintered Hope Tech 4 V4 brake pads built for strong bite and steady feel in heat and wet. Direct replacement that drops in clean with OEM sizing. One set services one caliper and includes a new spring and pin for a full refresh.
• Strong initial bite with predictable power on long descents
• Heat stable copper compound resists fade in repeated braking
• Direct fit for V4 calipers so the swap is quick and clean
• Includes new spring and pin so hardware is refreshed with the pads
Compound: Copper sintered
Pad Shape: Hope V4
Compatibility: Hope Tech 4 V4 and Tech 3 V4 calipers
Not Compatible: Hope E4 and calipers that do not use V4 pads
Included: One pad set for one caliper, one pad spring, one pad pin
Pack Options: 1 set, 2 sets, 4 sets
Difficulty: easy
Time: 5 to 10 minutes
Tools: Allen key set, flathead screwdriver
Loosen the two caliper bolts so the caliper can move slightly
Remove the pad pin or pad bolt and slide out the old pads and spring
Use a flathead to press the pistons fully back into the caliper
Slide in the new pads with the new spring and reinstall the pad pin
Center the caliper on the rotor and tighten the two bolts evenly
Pump the lever to seat the pads against the rotor
Bed the pads with 20 to 30 controlled stops from low to moderate speed
Torque Notes: Tighten caliper bolts and pad pin to manufacturer spec
Safety: Keep pad faces and rotor clean. Do not touch friction surfaces. Test brakes at low speed before riding hard.
Does this fit Hope Tech 4 V4 and Tech 3 V4 calipers
Yes. It fits both V4 calipers. It is not for Hope E4.
What makes this an upgrade over stock
The copper sintered compound offers a stronger initial bite and better heat stability than ceramic options while keeping OEM sizing for an easy swap.
Do I need to bleed the system
No. A pad change does not require a bleed unless the lever feels soft or the hydraulic system was opened.
Will this help with brake fade or wheelie control
Yes. The copper compound resists fade and delivers predictable modulation so you can hold the rear with confidence.
What is included in the box
One set of pads for one caliper plus a new pad spring and a pad pin.
Ships From USA!
