{"title":"ETM RTR Parts \u0026 Upgrades","description":"","products":[{"product_id":"surron-ultra-bee-brake-pads-performance","title":"Surron Ultra Bee Brake Pads \u0026 Moto Brake Pads","description":"\u003ch2\u003e\u003cstrong\u003eSurron Ultra Bee Brake Pads Sintered Performance\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\n\u003cem\u003e*NEW VERSION!\u003c\/em\u003e Full Copper Sintered Pad Material*\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFits: \u003c\/b\u003eSurron Ultra Bee (all years)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% Copper sintered for superior heat dissipation and braking efficiency under all conditions \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible \u003c\/strong\u003ewith both Front \u0026amp; Rear Brake Calipers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; height: 58.7814px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 21.6606%; height: 19.5938px;\"\u003eMaterial\u003c\/th\u003e\n\u003ctd style=\"width: 77.9783%; height: 19.5938px;\"\u003e100% Copper Sintered Performance Pad Material\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 21.6606%; height: 19.5938px;\"\u003eFitment\u003c\/th\u003e\n\u003ctd style=\"width: 77.9783%; height: 19.5938px;\"\u003eSurron Ultra Bee Brake Pads Fit Both Front \u0026amp; Rear Surron Ultra Bee Brake Calipers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 21.6606%; height: 19.5938px;\"\u003eOuter Pad\u003c\/th\u003e\n\u003ctd style=\"width: 77.9783%; height: 19.5938px;\"\u003eThe outside of the pad is made from Stainless Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFits These Models:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurron Ultra Bee (all years)\u003c\/li\u003e\n\u003cli\u003eFactoryZ Moto Brake Calipers \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-rear-brake-caliper?variant=50610443354398\" target=\"_self\"\u003e(OEM Green Surron Ultra Bee Calipers\u003c\/a\u003e, \u0026amp; \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-rear-brake-caliper?variant=50610443321630\" target=\"_self\"\u003eGen1 Black Surron Ultra Bee Calipers\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\"\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/a\u003e (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShips from USA!\u003c\/h2\u003e","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":49549943963934,"sku":"ULTRA-BEE-BRAKE-PADS","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/Surron_Ultra_Bee_Brake_Pads_3.webp?v=1772921365"},{"product_id":"surron-ultra-bee-brake-assembly-rear","title":"Surron Ultra Bee Brake Assembly Rear","description":"\u003ch2\u003eSurron Ultra Bee Brake Assembly Rear\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOEM Replacement Rear Assembly\u003c\/li\u003e\n\u003cli\u003eIncludes: Ultra Bee Master Cylinder, Ultra Bee Rear Brake Caliper, Rear Brake Line\u003c\/li\u003e\n\u003cli\u003eComes Pre-Bled!\u003c\/li\u003e\n\u003cli\u003eFits: Surron Ultra Bee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFits These Models:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurron Ultra Bee (all years)\u003c\/li\u003e\n\u003cli\u003eETM RTR Lite, Sport, Alpha, and XL (\u003cstrong\u003ewith the \u003ca href=\"https:\/\/factoryz.co\/products\/etm-rtr-ultra-bee-brake-bracket\"\u003eETM RTR Ultra Bee Brake Bracket\u003c\/a\u003e\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShips from USA!\u003c\/h3\u003e","brand":"FactoryZ","offers":[{"title":"Ultra Bee Custom (Green FactoryZ Caliper)","offer_id":50568446443806,"sku":"UB-REAR-HAND-BRAKE-ASSEMBLY-CUSTOM","price":199.99,"currency_code":"USD","in_stock":true},{"title":"OEM (Green Caliper)","offer_id":50568446411038,"sku":"UB-REAR-HAND-BRAKE-ASSEMBLY-OEM","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/surron-ultrabee-oem-rear-brake-asssembly.webp?v=1772919659"},{"product_id":"m10x1-25-titanium-banjo-bolt","title":"M10 x 1.25 Titanium Banjo Bolt – Grade 5 ( 2 pack )","description":"\u003cp data-end=\"430\" data-start=\"45\"\u003eShave grams, add strength, and forget about rust. This Grade 5 titanium banjo bolt in M10 × 1.25 pitch drops straight into dirt-bike or street-bike calipers and master cylinders, sealing brake fluid with a factory-fresh look. It’s pre-drilled for safety wire and ships with fresh copper crush washers, so you can torque, ride, and show off that titanium bling the moment the box lands.\u003c\/p\u003e\n\u003chr data-end=\"435\" data-start=\"432\"\u003e\n\u003ch3 data-end=\"451\" data-start=\"437\"\u003eFeatures\u003c\/h3\u003e\n\u003cul data-end=\"816\" data-start=\"452\"\u003e\n\u003cli data-end=\"544\" data-start=\"452\"\u003e\n\u003cp data-end=\"544\" data-start=\"454\"\u003ePure Grade 5 titanium—about 45 percent lighter than steel and completely corrosion-proof\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"641\" data-start=\"545\"\u003e\n\u003cp data-end=\"641\" data-start=\"547\"\u003eExact M10 × 1.25 mm thread for coarse-pitch Nissin, Honda, Yamaha, Surron, Talaria, and more\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"698\" data-start=\"642\"\u003e\n\u003cp data-end=\"698\" data-start=\"644\"\u003eSafety-wire holes ready for race-day tech inspection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"753\" data-start=\"699\"\u003e\n\u003cp data-end=\"753\" data-start=\"701\"\u003eCopper crush washers included for a leak-free seal\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"816\" data-start=\"754\"\u003e\n\u003cp data-end=\"816\" data-start=\"756\"\u003eSingle-banjo design keeps the fluid path compact and clean\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"821\" data-start=\"818\"\u003e\n\u003ch3 data-end=\"834\" data-start=\"823\"\u003eSpecs\u003c\/h3\u003e\n\u003cul data-end=\"1020\" data-start=\"835\"\u003e\n\u003cli data-end=\"862\" data-start=\"835\"\u003e\n\u003cp data-end=\"862\" data-start=\"837\"\u003eThread size: M10 × 1.25\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"886\" data-start=\"863\"\u003e\n\u003cp data-end=\"886\" data-start=\"865\"\u003eTotal length: 25 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"911\" data-start=\"887\"\u003e\n\u003cp data-end=\"911\" data-start=\"889\"\u003eThread length: 10 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"935\" data-start=\"912\"\u003e\n\u003cp data-end=\"935\" data-start=\"914\"\u003eHead height: 5.8 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"958\" data-start=\"936\"\u003e\n\u003cp data-end=\"958\" data-start=\"938\"\u003eBolt weight: 6.6 g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"986\" data-start=\"959\"\u003e\n\u003cp data-end=\"986\" data-start=\"961\"\u003eWasher weight: 1 g each\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1020\" data-start=\"987\"\u003e\n\u003cp data-end=\"1020\" data-start=\"989\"\u003eMaterial: Ti-6Al-4V (Grade 5)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"1025\" data-start=\"1022\"\u003e\n\u003ch3 data-end=\"1051\" data-start=\"1027\"\u003eBike Compatibility\u003c\/h3\u003e\n\u003cul data-end=\"1334\" data-start=\"1052\"\u003e\n\u003cli data-end=\"1100\" data-start=\"1052\"\u003e\n\u003cp data-end=\"1100\" data-start=\"1054\"\u003eSurron Ultra Bee and Light Bee moto brake systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1144\" data-start=\"1101\"\u003e\n\u003cp data-end=\"1144\" data-start=\"1103\"\u003eTalaria MX3, MX4, and X3 moto brake systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1176\" data-start=\"1145\"\u003e\n\u003cp data-end=\"1176\" data-start=\"1147\"\u003eE-Ride Pro SS moto brake systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\"\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/a\u003e (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1221\" data-start=\"1177\"\u003e\n\u003cp data-end=\"1221\" data-start=\"1179\"\u003eHonda CRF and CBR models (coarse thread)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1334\" data-start=\"1222\"\u003e\n\u003cp data-end=\"1334\" data-start=\"1224\"\u003eYamaha YZ and R-series, Kawasaki KX and ZX, plus any caliper or master cylinder that uses M10 × 1.25 threads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"1339\" data-start=\"1336\"\u003e\n\u003ch3 data-end=\"1360\" data-start=\"1341\"\u003eInstall Guide\u003c\/h3\u003e\n\u003col data-end=\"1716\" data-start=\"1361\"\u003e\n\u003cli data-end=\"1424\" data-start=\"1361\"\u003e\n\u003cp data-end=\"1424\" data-start=\"1364\"\u003eRemove the old bolt and washers, catching any brake fluid.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1489\" data-start=\"1425\"\u003e\n\u003cp data-end=\"1489\" data-start=\"1428\"\u003eSlide a new copper washer on each side of the hose fitting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1567\" data-start=\"1490\"\u003e\n\u003cp data-end=\"1567\" data-start=\"1493\"\u003eFinger-start the titanium bolt and make sure the threads glide smoothly.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1644\" data-start=\"1568\"\u003e\n\u003cp data-end=\"1644\" data-start=\"1571\"\u003eTorque to \u003cstrong data-end=\"1596\" data-start=\"1581\"\u003e20 – 25 N·m\u003c\/strong\u003e (15 – 18 lb-ft) or follow your bike’s manual.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1716\" data-start=\"1645\"\u003e\n\u003cp data-end=\"1716\" data-start=\"1648\"\u003ePump the lever, check for leaks, and safety-wire if you’re racing.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003chr data-end=\"1721\" data-start=\"1718\"\u003e\n\u003ch3 data-end=\"1733\" data-start=\"1723\"\u003eFAQs\u003c\/h3\u003e\n\u003cp data-end=\"1881\" data-start=\"1735\"\u003e\u003cstrong data-end=\"1778\" data-start=\"1735\"\u003eDo I need thread sealant or anti-seize?\u003c\/strong\u003e\u003cbr data-end=\"1781\" data-start=\"1778\"\u003eKind of. You should use anti-seize if installing into aluminum, make sure the anti-seize is copper or nickel based. You should not use thread locker on titanium hardware\u003c\/p\u003e\n\u003cp data-end=\"1980\" data-start=\"1883\"\u003e\u003cstrong data-end=\"1911\" data-start=\"1883\"\u003eCan I reuse the washers?\u003c\/strong\u003e\u003cbr data-end=\"1914\" data-start=\"1911\"\u003eBest practice is to replace them every time you remove the bolt.\u003c\/p\u003e\n\u003cp data-end=\"2116\" data-start=\"1982\"\u003e\u003cstrong data-end=\"2029\" data-start=\"1982\"\u003eWill this fit a Brembo RCS master cylinder?\u003c\/strong\u003e\u003cbr data-end=\"2032\" data-start=\"2029\"\u003eBrembo uses fine-thread M10 × 1.0. \u003ca href=\"https:\/\/factoryz.co\/products\/m10-x-1-00-titanium-banjo-bolt-grade-5\" title=\"M10 x 1.00MM Titanium Banjo Bolts\"\u003eGrab our M10 × 1.0 titanium banjo bolt instead.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"2116\" data-start=\"1982\"\u003e\u003cstrong\u003eShips From USA!\u003c\/strong\u003e\u003c\/h3\u003e","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":49343581126942,"sku":"BANJO-M10-125","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/m10x1-25-titanium-banjo-bolts-copper-washers.webp?v=1772921069"},{"product_id":"surron-ultra-bee-rear-brake-caliper","title":"Surron Ultra Bee Rear Brake Caliper OEM","description":"\u003ch2\u003e\u003cstrong\u003eRear Brake CaliperFor Surron Ultra Bee\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eOEM Replacement Rear Brake Caliper\u003c\/p\u003e\n\u003cp\u003eFits: Surron Ultra Bee, ( or FactoryZ Moto Brake Kits )\u003c\/p\u003e\n\u003cp\u003eAlso fits: \u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\"\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/a\u003e (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/p\u003e\n\u003cp\u003ePackage Includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 Surron Ultra Bee Rear Brake Caliper\u003c\/li\u003e\n\u003cli\u003e1 Rear Brake Caliper Bracket \u003c\/li\u003e\n\u003cli\u003eAll OEM Hardware ( 1 Banjo Bolt + 2  Copper Crush Washers, 2 Calipers Posts, 2 Pad Pins, 1 pad set, 1 Pad Spring, 1 Bleeder Valve + Cover)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShips From USA!!\u003c\/h3\u003e","brand":"FactoryZ","offers":[{"title":"Ultra Bee Custom (Green FactoryZ Caliper)","offer_id":50610443321630,"sku":"UB-Rear-Caliper-Gen1","price":84.99,"currency_code":"USD","in_stock":true},{"title":"OEM Surron Brand (Green Caliper)","offer_id":50610443354398,"sku":"UB-Rear-Caliper-OEM","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/surron-ultra-bee-rear-brake-caliper-oem-front-angle-close-up.webp?v=1782131246"},{"product_id":"surron-ultra-bee-master-cylinder-rear","title":"Surron Ultra Bee Rear Master Cylinder","description":"\u003cp\u003eGenuine OEM Surron Ultra Bee rear master cylinder for the left-hand brake lever. Fits every Ultra Bee year, plus any bike running a Surron Ultra Bee brake conversion. Hand lever, not foot brake.\u003c\/p\u003e\n\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine Surron OEM part - the rear brake master cylinder Surron builds into the Ultra Bee.\u003c\/li\u003e\n  \u003cli\u003eLeft-hand mount - runs the rear brake from the handlebar.\u003c\/li\u003e\n  \u003cli\u003eM10 x 1.25 banjo bolt thread - your stock rear line threads straight in.\u003c\/li\u003e\n  \u003cli\u003eAdjustable lever position - put the lever where your left hand wants it.\u003c\/li\u003e\n  \u003cli\u003eShips dry - takes DOT 3, DOT 4, or DOT 5.1 brake fluid. Bleed after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSurron Ultra Bee (\u003cstrong\u003eall years\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eSurron Light Bee (\u003cstrong\u003ewith Ultra Bee brake conversion\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10 (\u003cstrong\u003ewith Ultra Bee brake conversion\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\"\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/a\u003e (\u003cstrong\u003ewith Ultra Bee brake conversion\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits any bike with a Surron Ultra Bee brake conversion. On the ETM RTR, that means our \u003ca href=\"https:\/\/factoryz.co\/products\/etm-rtr-ultra-bee-brake-kit-pre-bled\"\u003eETM RTR Ultra Bee Brake Kit\u003c\/a\u003e or another Ultra Bee caliper swap.\u003c\/p\u003e\n\n\u003ch2\u003eSurron Ultra Bee Rear Master Cylinder FAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this the foot brake master cylinder?\u003c\/h3\u003e\n\u003cp\u003eNo. This one mounts on the left handlebar and runs the rear brake by hand. Running a foot brake? You want the \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-foot-brake-master-cylinder\"\u003eSurron Ultra Bee Foot Brake Master Cylinder\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhich Ultra Bee years does it fit?\u003c\/h3\u003e\n\u003cp\u003eAll of them. It replaces the factory rear master on any Ultra Bee, no adapters.\u003c\/p\u003e\n\u003ch3\u003eWill it work on my Light Bee, Yozma, or ETM?\u003c\/h3\u003e\n\u003cp\u003eYes, once the bike runs a Surron Ultra Bee brake conversion. The conversion has to be in place first.\u003c\/p\u003e\n\u003ch3\u003eDoes it come bled and filled?\u003c\/h3\u003e\n\u003cp\u003eNo. It ships dry. Install it, connect the rear line, fill, and bleed before riding. Our \u003ca href=\"https:\/\/factoryz.co\/products\/brake-bleed-kit-factoryz\"\u003ebleed kit with check valve\u003c\/a\u003e covers the job.\u003c\/p\u003e\n\u003ch3\u003eWhich brake fluid?\u003c\/h3\u003e\n\u003cp\u003eDOT 3, DOT 4, and DOT 5.1 all work. \u003ca href=\"https:\/\/factoryz.co\/products\/motul-dot-5-1-brake-fluid\"\u003eMotul DOT 5.1\u003c\/a\u003e is on our shelf.\u003c\/p\u003e\n\u003ch3\u003eWhat size banjo bolt?\u003c\/h3\u003e\n\u003cp\u003eM10 x 1.25. \u003ca href=\"https:\/\/factoryz.co\/products\/m10x1-25-titanium-banjo-bolt\"\u003eTitanium replacements\u003c\/a\u003e in the same thread are in stock.\u003c\/p\u003e\n\u003ch3\u003eDo I need to replace the front too?\u003c\/h3\u003e\n\u003cp\u003eOnly if it's worn or damaged. The front is the right-hand master and ships with a hand guard bracket: \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-master-cylinder-front\"\u003eSurron Ultra Bee Master Cylinder Front\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":49650570625310,"sku":"UB-MASTER-CYLINDER-REAR","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/Surron_Ultra_Bee_Master_Cylinder_Rear.jpg?v=1772920408"},{"product_id":"surron-ultra-bee-master-cylinder-front","title":"Surron Ultra Bee Master Cylinder Front","description":"\u003cp\u003eGenuine OEM Surron Ultra Bee master cylinder for the front brake, mounted on the right side of the bar. Direct replacement on the Ultra Bee and on any bike running a Surron Ultra Bee brake conversion. Bolt-on. No fabrication.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the box?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 front brake master cylinder (right-hand)\u003c\/li\u003e\n  \u003cli\u003e1 hand guard bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGenuine Surron OEM part - the same front master cylinder Surron fits to the Ultra Bee.\u003c\/li\u003e\n  \u003cli\u003eRight-hand mount - runs the front brake lever.\u003c\/li\u003e\n  \u003cli\u003eM10 x 1.25 banjo bolt thread - matches stock Ultra Bee front brake lines.\u003c\/li\u003e\n  \u003cli\u003eAdjustable lever position - set the lever where your fingers land.\u003c\/li\u003e\n  \u003cli\u003eShips dry - fill with DOT 3, DOT 4, or DOT 5.1 brake fluid and bleed after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSurron Ultra Bee\u003c\/li\u003e\n  \u003cli\u003eSurron Light Bee (\u003cstrong\u003ewith Ultra Bee brake conversion\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10 (\u003cstrong\u003ewith Ultra Bee brake conversion\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eETM RTR Lite, Sport, Alpha, and XL (\u003cstrong\u003ewith Ultra Bee brake conversion\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFits any bike with a Surron Ultra Bee brake conversion, including FactoryZ Moto Brake kits.\u003c\/p\u003e\n\n\u003ch2\u003eSurron Ultra Bee Master Cylinder Front FAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this fit my Surron Ultra Bee?\u003c\/h3\u003e\n\u003cp\u003eYes. It is the factory front master cylinder for the Ultra Bee and clamps to the right side of the bar in the stock position. No adapters needed.\u003c\/p\u003e\n\u003ch3\u003eDoes it work on a bike that isn't an Ultra Bee?\u003c\/h3\u003e\n\u003cp\u003eOnly if that bike runs a Surron Ultra Bee brake conversion. Light Bee, Yozma IN 10, and ETM RTR builds with the conversion take it the same way a stock Ultra Bee does. Without the conversion, keep the bike's own master cylinder.\u003c\/p\u003e\n\u003ch3\u003eIs it filled and bled out of the box?\u003c\/h3\u003e\n\u003cp\u003eNo. It ships dry. Mount it, connect the front line, then fill and bleed the system before you ride.\u003c\/p\u003e\n\u003ch3\u003eWhat brake fluid does it take?\u003c\/h3\u003e\n\u003cp\u003eDOT 3, DOT 4, or DOT 5.1. We stock \u003ca href=\"https:\/\/factoryz.co\/products\/motul-dot-5-1-brake-fluid\"\u003eMotul DOT 5.1\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat banjo bolt does it use?\u003c\/h3\u003e\n\u003cp\u003eM10 x 1.25. Want titanium? Our \u003ca href=\"https:\/\/factoryz.co\/products\/m10x1-25-titanium-banjo-bolt\"\u003eM10 x 1.25 titanium banjo bolts\u003c\/a\u003e thread straight in.\u003c\/p\u003e\n\u003ch3\u003eFront or rear, which one do I need?\u003c\/h3\u003e\n\u003cp\u003eThis is the right-hand front. The left-hand lever runs the rear brake and takes the \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-master-cylinder-rear\"\u003eSurron Ultra Bee Rear Master Cylinder\u003c\/a\u003e. Only the front ships with a hand guard bracket.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":49650589696286,"sku":"UB-MASTER-CYLINDER-FRONT","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/Surron_Ultra_Bee_Master_Cylinder_Front.jpg?v=1772920401"},{"product_id":"titanium-brake-caliper-nipple","title":"Titanium Brake Caliper Nipple Bleed Screw","description":"\u003ch2\u003eBrake Caliper Nipple Bleed Screw Made From Titanium\u003c\/h2\u003e\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade from GR5 Titanium\u003c\/li\u003e\n\u003cli\u003eM8x1.25 Thread Pitch\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFits These Models:\u003c\/h2\u003e\n\u003cp\u003eMoto Brakes ONLY for these models:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurron Light Bee\u003c\/li\u003e\n\u003cli\u003eTalaria X3 \/ MX3 \/ MX4 \/ MX5\u003c\/li\u003e\n\u003cli\u003eEride Pro SS 1.0 \/ 2.0 \/ 3.0 \/ SR \/ Pro S\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\"\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/a\u003e (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOEM \u0026amp; upgraded brakes for these models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurron Ultra Bee \/ Storm Bee\u003c\/li\u003e\n\u003cli\u003eStark Varg\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eShips From USA!\u003c\/h2\u003e","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":50195223740702,"sku":"TITANIUM-BLEEDER-NIPPLE","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/titanium-brake-caliper-nippler.webp?v=1772919957"},{"product_id":"brake-bleed-kit-factoryz","title":"Ultra Bee Brake Bleed Kit With Check Valve","description":"\u003cp\u003eThis Ultra Bee brake bleed kit bleeds any dirt bike caliper with an M8 bleeder screw, including Moto Brake conversions on the Surron Light Bee, Talaria, and Eride Pro. No syringe. Your brake lever pushes the fluid, and the one-way check valve keeps air from getting back into the caliper.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the box?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 check valve\u003c\/li\u003e\n  \u003cli\u003e2 hoses\u003c\/li\u003e\n  \u003cli\u003e4 hose clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOne-way check valve - fluid flows out of the caliper, air can't flow back in.\u003c\/li\u003e\n  \u003cli\u003e3mm ID hose - slides over an M8 bleeder screw and seals.\u003c\/li\u003e\n  \u003cli\u003e5 in and 10 in hose lengths - run inline with the check valve to your catch bottle.\u003c\/li\u003e\n  \u003cli\u003e4 hose clamps - lock each joint so the hose stays on mid-bleed.\u003c\/li\u003e\n  \u003cli\u003eNo syringe - the lever does the work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSurron Ultra Bee\u003c\/li\u003e\n  \u003cli\u003eSurron LB2\u003c\/li\u003e\n  \u003cli\u003eStark Varg MX\u003c\/li\u003e\n  \u003cli\u003eStark Varg EX\u003c\/li\u003e\n  \u003cli\u003eStark Varg SM\u003c\/li\u003e\n  \u003cli\u003eTuttio Soleil 01\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10 PRO\u003c\/li\u003e\n  \u003cli\u003eValtinsu EM-5\u003c\/li\u003e\n  \u003cli\u003eValtinsu EM-5 PRO\u003c\/li\u003e\n  \u003cli\u003eStrike Shadow\u003c\/li\u003e\n  \u003cli\u003eSurron Light Bee (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e; also sold as Segway X160 \/ X260)\u003c\/li\u003e\n  \u003cli\u003eTalaria X3 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX3 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX4 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX5 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro S (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 2.0 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 3.0 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 4.0 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eETM RTR Lite, Sport, and Alpha (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eAny dirt bike or pit bike caliper (\u003cstrong\u003ewith an M8 bleeder screw\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith Moto Brake means the bike runs a FactoryZ Moto Brake kit or another Ultra Bee caliper brake conversion.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit: stock brakes on the Surron Light Bee, Eride Pro S, Eride Pro SS 2.0, Eride Pro SS 3.0, Eride Pro SS 4.0, Talaria X3, Talaria MX3, Talaria MX4, or Talaria MX5.\u003c\/p\u003e\n\n\u003ch2\u003eUltra Bee Brake Bleed Kit FAQ\u003c\/h2\u003e\n\u003ch3\u003eDo I need a syringe?\u003c\/h3\u003e\n\u003cp\u003eNo. This kit runs on hoses and a check valve only. The brake lever moves the fluid through the system.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I bleed my brakes with this kit?\u003c\/h3\u003e\n\u003cp\u003eClamp the hose to the bleeder screw and fill the master cylinder. Open the bleeder, push the lever, close the bleeder, release the lever. Pump the lever a couple times, then wait at least 5 seconds before running those four steps again. Slower works better, and keep the master topped off the whole time.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does the check valve do?\u003c\/h3\u003e\n\u003cp\u003eIt lets fluid leave the caliper and blocks air from flowing back up the hose. Air that leaves stays out.\u003c\/p\u003e\n\n\u003ch3\u003eWill it fit my bike?\u003c\/h3\u003e\n\u003cp\u003eIt fits any caliper with an M8 bleeder screw. The Surron Ultra Bee, Surron LB2, Stark Varg, Tuttio Soleil 01, Yozma, Valtinsu, and Strike Shadow take it on stock brakes. The Surron Light Bee, Talaria, and Eride Pro need a Moto Brake conversion first, since their stock brakes do not fit this kit.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it work on front and rear calipers?\u003c\/h3\u003e\n\u003cp\u003eYes. Any caliper with an M8 bleeder screw, front or rear, takes the same 3mm ID hose.\u003c\/p\u003e\n\n\u003ch3\u003eIs brake fluid included?\u003c\/h3\u003e\n\u003cp\u003eNo. Fluid is sold separately. Use the fluid your brake system specifies. We stock \u003ca href=\"\/products\/motul-dot-5-1-brake-fluid\"\u003eMotul DOT 5.1 Brake Fluid\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eInstall Guide:\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/install-how-to-bleed-moto-brakes\"\u003eView the Full Step-by-Step Bleed Guide and Video\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":50378021404958,"sku":"MB-BLEED-KIT","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/factoryz-brake-bleed-check-valve-and-brake-hose.webp?v=1785775287"},{"product_id":"surron-ultra-bee-moto-brake-caliper-hardware-kit","title":"Surron Ultra Bee Moto Brake Caliper Hardware Kit","description":"\u003ch2\u003eCaliper Poles \u0026amp; Rubber Sliders for Surron Ultra Bee Moto Brakes\u003c\/h2\u003e\n\u003cp\u003eDamaged your brake caliper rubber sliders or your caliper slider poles? We have OEM Replacements on hand!\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eFits These Models\u003c\/strong\u003e:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoto Brake Upgrade For\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e( Surron Light Bee, Talaria X3 MX3 MX4, Eride Pro SS 1.0 2.0 3.0 SR )\u003c\/li\u003e\n\u003cli\u003eSurron Ultra Bee Brakes ( all years )\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\"\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/a\u003e (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded In Box:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 Caliper Rubber Slider\u003c\/li\u003e\n\u003cli\u003e1 Caliper Pole Slider\u003c\/li\u003e\n\u003cli\u003e1 Caliper Bracket Rubber Slider\u003c\/li\u003e\n\u003cli\u003e1 Caliper Bracket Pole Slider\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePole \u0026amp; Slider Positioning:\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/ultra-bee-caliper-side-rubber-slider-and-pole-close-up.webp?v=1765905958\" alt=\"Surron Ultra Bee Moto Brake caliper hardware kit, rubber slider and pole circled in red on a black caliper with brake pads\" width=\"300\" height=\"300\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/ultra-bee-caliper-bracket-rubber-slider-and-pole-close-up.webp?v=1765905958\" alt=\"Surron Ultra Bee Moto Brake caliper hardware kit, silver pole and rubber slider circled on the black caliper bracket\" width=\"300\" height=\"300\"\u003e\u003c\/h2\u003e\n\u003ch2\u003eShips From USA!\u003c\/h2\u003e","brand":"FactoryZ","offers":[{"title":"2 Caliper Poles + 2 Rubber Sliders","offer_id":59708303868190,"sku":"UB-CHK","price":24.99,"currency_code":"USD","in_stock":true},{"title":"Full Kit (2 Caliper Poles + 2 Rubber Sliders + 1 Brass Pad Retaining Clip)","offer_id":59708303900958,"sku":"UB-CHK+BRASS-RETAINING-CLIP","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/surron-ultra-bee-moto-brake-caliper-hardware-kit-angle-2.webp?v=1772919562"},{"product_id":"factoryz-water-bottle-holster-for-emoto","title":"FactoryZ Water Bottle Holster for E-moto","description":"","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":51861157282078,"sku":"FACTORYZ-WATER-HOLSTER","price":19.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/factoryz-water-bottle-holster.webp?v=1779106156"},{"product_id":"copper-crush-washer-replacement-kit-m10","title":"Copper Crush Washer Replacement kit M10","description":"\u003ch2\u003eM10 Copper Crush Washer Replacement Kit for Moto Brakes\u003c\/h2\u003e\n\u003cp\u003eThis kit includes 4 copper crush washers, enough for 2 calipers. 2 Copper crush washers per calipers, on Moto brake \u0026amp; Surron Ultra Bee Calipers\u003c\/p\u003e\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy Duty Thick Copper Crush Washers\u003c\/li\u003e\n\u003cli\u003e16mm OD\u003c\/li\u003e\n\u003cli\u003e10mm ID\u003c\/li\u003e\n\u003cli\u003e1.5mm Thick\u003c\/li\u003e\n\u003cli\u003e4 pieces per order\u003c\/li\u003e\n\u003cli\u003e4 pieces is enough for 2 calipers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFits These Models:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSurron Ultra Bee Brakes (all years)\u003c\/li\u003e\n\u003cli\u003eSurron Ultra Bee Gen1 Calipers (all years)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSurron Moto Brakes\u003c\/li\u003e\n\u003cli\u003eEride Pro 22 3.0 \/ SR (all years)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTalaria MX5 (all years)\u003c\/li\u003e\n\u003cli\u003eStark Varg EX\/SM\/MX (all years)\u003c\/li\u003e\n\u003cli\u003eTuttio Soleil 01 (all years)\u003c\/li\u003e\n\u003cli\u003eStrike Shadow (all models \u0026amp; years)\u003c\/li\u003e\n\u003cli\u003eValtinsu EM-5 (all years)\u003c\/li\u003e\n\u003cli\u003eYozma IN10 (all years)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\"\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/a\u003e (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eShips Next Day From USA!\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Default Title","offer_id":59470232748318,"sku":"COPPER-CRUSH-WASHERS","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/copper-crush-washer-set-4-pieces.webp?v=1781630899"},{"product_id":"ultra-bee-brake-caliper-refresh-kit","title":"Surron Ultra Bee Caliper Rebuild Kit","description":"\u003cp\u003eThis Surron Ultra Bee caliper rebuild kit replaces every wear part in one caliper, front or rear, in a single order. It fits all Ultra Bee years on stock brakes, plus any bike running a FactoryZ Moto Brake kit or another Ultra Bee caliper brake conversion. $60 for parts that run $74.97 bought separately.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the box?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 set of brake pads\u003c\/li\u003e\n  \u003cli\u003e1 brake caliper retaining clip spring\u003c\/li\u003e\n  \u003cli\u003e2 caliper poles\u003c\/li\u003e\n  \u003cli\u003e2 rubber sliders\u003c\/li\u003e\n  \u003cli\u003e1 pad retaining clip\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFull copper sintered pad material - a higher quality compound made to last when your brakes get hot.\u003c\/li\u003e\n  \u003cli\u003eBrass pad retaining clip and retaining clip spring - keep the pads spread correctly in the caliper.\u003c\/li\u003e\n  \u003cli\u003eNew caliper poles and rubber sliders - a fresh slide surface so the caliper floats and centers on the rotor.\u003c\/li\u003e\n  \u003cli\u003eFits the FactoryZ Custom caliper and the OEM Surron caliper - one kit covers either option.\u003c\/li\u003e\n  \u003cli\u003eOne kit per caliper - works on the front or rear caliper.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSurron Ultra Bee (\u003cstrong\u003eall years, stock brakes\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eSurron Light Bee (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria X3 \/ XXX (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX3 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX4 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTalaria MX5 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 2.0 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 3.0 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eEride Pro SR (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eTuttio Soleil 01 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eStrike Shadow (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10 PRO (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eValtinsu EM-5 (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eValtinsu EM-5 PRO (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n  \u003cli\u003eETM RTR Light, Sport, and Alpha (\u003cstrong\u003ewith Moto Brake\u003c\/strong\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\"With Moto Brake\" means the bike runs a FactoryZ Moto Brake kit or any other Ultra Bee caliper brake conversion.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit: Nibbi calipers, including the \u003ca href=\"\/products\/surron-ultra-bee-big-brake-kit\"\u003eSurron Ultra Bee Big Brake Kit\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eSurron Ultra Bee Caliper Rebuild Kit FAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this rebuild kit fit my bike?\u003c\/h3\u003e\n\u003cp\u003eOn a Surron Ultra Bee, yes, any year, on the stock brakes. On a Light Bee, Talaria, Eride Pro, Tuttio, Strike, Yozma, Valtinsu, or RTR, it fits once the bike runs a Moto Brake kit or another Ultra Bee caliper conversion. It does not fit Nibbi calipers.\u003c\/p\u003e\n\u003ch3\u003eDoes it work on both the FactoryZ Custom caliper and the OEM Surron caliper?\u003c\/h3\u003e\n\u003cp\u003eYes. The OEM 2025\/2026 Surron caliper is a slightly revised design, and this kit still fits it. The FactoryZ Custom caliper takes it too.\u003c\/p\u003e\n\u003ch3\u003eHow many kits do I need?\u003c\/h3\u003e\n\u003cp\u003eOne kit per caliper. Front and rear on an Ultra Bee takes two. A dual caliper foot brake setup adds a third caliper, so plan on one more kit.\u003c\/p\u003e\n\u003ch3\u003eHow much does the kit save over buying the parts one by one?\u003c\/h3\u003e\n\u003cp\u003eAbout $15. Separately, the \u003ca href=\"\/products\/surron-ultra-bee-brake-pads-performance\"\u003ebrake pads\u003c\/a\u003e are $29.99, the \u003ca href=\"\/products\/surron-ultra-bee-brake-caliper-retaining-clip-spring\"\u003eretaining clip spring\u003c\/a\u003e is $9.99, and the full \u003ca href=\"\/products\/surron-ultra-bee-moto-brake-caliper-hardware-kit\"\u003ecaliper hardware kit\u003c\/a\u003e is $34.99. That is $74.97 against $60 here.\u003c\/p\u003e\n\u003ch3\u003eWhich brake pads come in the kit?\u003c\/h3\u003e\n\u003cp\u003eThe same full copper sintered pads we sell on their own for the Ultra Bee and Moto Brake.\u003c\/p\u003e\n\u003ch3\u003eIs the caliper pad pin included?\u003c\/h3\u003e\n\u003cp\u003eNo. The pad pin is not part of this kit. If yours is worn or bent, add a \u003ca href=\"\/products\/surron-ultra-bee-brake-caliper-pad-pin\"\u003eSurron Ultra Bee brake caliper pad pin\u003c\/a\u003e to the order.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"1 Set Pads + Spring + Hardware Kit","offer_id":60157029318942,"sku":"UB-CALIPER-REFRESH-KIT","price":60.0,"currency_code":"USD","in_stock":true},{"title":"1 Set Pads + Spring + Hardware Kit + Pad Pins","offer_id":60157029351710,"sku":"UB-CALIPER-REFRESH-KIT-WITH-PINS","price":76.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/surron-ultra-bee-brake-caliper-refresh-kit.webp?v=1789505927"},{"product_id":"etm-rtr-ultra-bee-brake-kit-pre-bled","title":"ETM RTR Ultra Bee Brake Kit, Pre-Bled","description":"\u003cp\u003eThis kit replaces your stock ETM RTR brakes with a Surron Ultra Bee master cylinder and caliper, shipped pre-bled and ready to bolt on. It fits the RTR Lite, Sport, Alpha, and XL, and runs your stock 203mm rotor. Bolt-on. No bleeding. No fabrication.\u003c\/p\u003e\n\u003ch2\u003eWhat's in the box?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 Ultra Bee master cylinder, pre-bled with a steel-braided brake line to 1 Ultra Bee caliper (FactoryZ Custom or OEM Surron), filled with Motul DOT 5.1 brake fluid\u003c\/li\u003e\n\u003cli\u003e1 single caliper bracket\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSurron Ultra Bee hand brake master cylinder - the same lever and reservoir the Ultra Bee runs, on your bar.\u003c\/li\u003e\n\u003cli\u003eFactoryZ Custom (green) or OEM Surron Ultra Bee caliper - same metal, seals, and pistons. The OEM adds genuine Surron branding and a slightly larger body.\u003c\/li\u003e\n\u003cli\u003eSteel-braided brake line - holds its shape under pressure, so the lever stays firm.\u003c\/li\u003e\n\u003cli\u003eSingle caliper bracket, CNC-machined from 6061-T6 aluminum, black or silver - stiff, light, and holds the caliper square to the rotor.\u003c\/li\u003e\n\u003cli\u003ePre-bled with Motul DOT 5.1 brake fluid - high boiling point, ready to ride out of the box.\u003c\/li\u003e\n\u003cli\u003eRuns the stock 203mm rotor - no rotor swap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eETM RTR Ultra Bee Brake Kit FAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this kit fit my ETM RTR?\u003c\/h3\u003e\n\u003cp\u003eYes. It fits the RTR Lite, Sport, Alpha, and XL. All four share one frame, so the kit bolts to the same factory mounts on each.\u003c\/p\u003e\n\u003ch3\u003eDo I need any other parts?\u003c\/h3\u003e\n\u003cp\u003eNo. Master cylinder, line, caliper, bracket, and hardware are all in the box. It reuses your stock 203mm rotor.\u003c\/p\u003e\n\u003ch3\u003eDoes it ship pre-bled?\u003c\/h3\u003e\n\u003cp\u003eYes. The system ships filled with Motul DOT 5.1 and bled. Mount it, route the line, and ride. You do not open the hydraulics to install it.\u003c\/p\u003e\n\u003ch3\u003eFactoryZ Custom or OEM Surron caliper: what is the difference?\u003c\/h3\u003e\n\u003cp\u003eBoth use the same metal, seals, and pistons, and they perform the same. The FactoryZ Custom caliper is green and is the lower-cost option. The OEM Surron caliper carries genuine Surron branding and a slightly larger body.\u003c\/p\u003e\n\u003ch3\u003eCan I add a foot brake?\u003c\/h3\u003e\n\u003cp\u003eNot on the RTR today. The RTR bracket is single caliper only, so this kit runs one caliper on your hand lever.\u003c\/p\u003e\n\u003ch3\u003eWhat brake pads does it take?\u003c\/h3\u003e\n\u003cp\u003eStandard Surron Ultra Bee caliper pads. Replacements are here: \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-brake-pads-performance\"\u003eSurron Ultra Bee brake pads\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs this a Moto Brake kit?\u003c\/h3\u003e\n\u003cp\u003eYes. Moto Brake is the older name for an Ultra Bee brake conversion kit. Same idea: the Ultra Bee caliper and master cylinder on a bike that did not ship with them.\u003c\/p\u003e\n\u003ch3\u003eHow hard is the install?\u003c\/h3\u003e\n\u003cp\u003eBolt-on to the factory mounts. No cutting and no fabrication.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\" title=\"Link to ETM RTR Parts Collection page\"\u003eSee all RTR Parts Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Ultra Bee Custom (Green FactoryZ Caliper) \/ Black Single Caliper Bracket","offer_id":60048411132190,"sku":"RTR-MOTO-BRAKE-BLACK-CUSTOM","price":209.99,"currency_code":"USD","in_stock":true},{"title":"Ultra Bee Custom (Green FactoryZ Caliper) \/ Silver Single Caliper Bracket","offer_id":60048411164958,"sku":"RTR-MOTO-BRAKE-SILVER-CUSTOM","price":209.99,"currency_code":"USD","in_stock":true},{"title":"OEM Surron Brand (Green Caliper) \/ Black Single Caliper Bracket","offer_id":60048411197726,"sku":"RTR-MOTO-BRAKE-BLACK-OEM","price":349.99,"currency_code":"USD","in_stock":true},{"title":"OEM Surron Brand (Green Caliper) \/ Silver Single Caliper Bracket","offer_id":60048411230494,"sku":"RTR-MOTO-BRAKE-SILVER-OEM","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/etm-rtr-ultra-bee-brake-kit-black-custom.webp?v=1790343114"},{"product_id":"etm-rtr-ultra-bee-brake-bracket","title":"ETM RTR Ultra Bee Brake Bracket","description":"\u003cp\u003eThis ETM RTR brake bracket mounts a Surron Ultra Bee brake caliper to the factory rear mounts on the RTR Lite, Sport, Alpha, and XL. It lines the caliper up with your stock 203mm rotor, so the caliper is the only upgrade. Bring your own Ultra Bee caliper and master cylinder, or get the complete kit.\u003c\/p\u003e\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC-machined 6061-T6 aluminum - stiff, light, and holds the caliper square to the rotor under load.\u003c\/li\u003e\n\u003cli\u003eSingle caliper design - mounts one Ultra Bee caliper for a hand brake setup.\u003c\/li\u003e\n\u003cli\u003eBlack or silver finish - match the rest of your build.\u003c\/li\u003e\n\u003cli\u003eSized for the stock 203mm rotor - no rotor swap.\u003c\/li\u003e\n\u003cli\u003eMounting hardware included - bolts to the factory mounts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eETM RTR Lite, Sport, Alpha, and XL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eETM RTR Ultra Bee Brake Bracket FAQ\u003c\/h2\u003e\n\u003ch3\u003eWill this bracket fit my RTR?\u003c\/h3\u003e\n\u003cp\u003eYes. The RTR Lite, Sport, Alpha, and XL are one frame at different power levels, so a single bracket covers all four.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need?\u003c\/h3\u003e\n\u003cp\u003eThe bracket holds the caliper. You still need a \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-rear-brake-caliper\"\u003eSurron Ultra Bee brake caliper\u003c\/a\u003e and an \u003ca href=\"https:\/\/factoryz.co\/products\/surron-ultra-bee-brake-assembly-rear\"\u003eUltra Bee rear hand brake assembly\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eBracket or the full kit: which should I buy?\u003c\/h3\u003e\n\u003cp\u003eAlready running an Ultra Bee caliper and master cylinder? The bracket is the missing piece. Starting from the stock brakes, the \u003ca href=\"https:\/\/factoryz.co\/products\/etm-rtr-ultra-bee-brake-kit-pre-bled\"\u003eETM RTR Ultra Bee brake kit\u003c\/a\u003e ships every part filled, bled, and ready to bolt on.\u003c\/p\u003e\n\u003ch3\u003eIs there a dual caliper version?\u003c\/h3\u003e\n\u003cp\u003eNot for the RTR. This bracket is single caliper only and runs one caliper on your hand lever.\u003c\/p\u003e\n\u003ch3\u003eDoes it work with my stock rotor?\u003c\/h3\u003e\n\u003cp\u003eYes. It is sized for the stock 203mm rotor, so the rotor stays.\u003c\/p\u003e\n\u003ch3\u003eHow hard is the install?\u003c\/h3\u003e\n\u003cp\u003eBolt-on. No cutting and no fabrication. All mounting hardware is in the box.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/factoryz.co\/collections\/etm-rtr-parts\" title=\"Link to ETM RTR Parts Collection page\"\u003eSee all RTR Parts Here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Black","offer_id":60048411492638,"sku":"RTR-MOTO-BRAKE-BRACKET-BLACK","price":98.99,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":60048411525406,"sku":"RTR-MOTO-BRAKE-BRACKET-SILVER","price":98.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/etm-rtr-ultra-bee-brake-bracket-black.webp?v=1790343077"},{"product_id":"surron-talaria-waffle-grips","title":"FactoryZ Surron Waffle Grips","description":"\u003cp\u003eThese Surron grips swap the stock rubber for a softer waffle compound that grabs better and soaks up trail chatter before it reaches your hands. They push onto the stock bar and throttle tube on Surron, Talaria, Eride Pro, Stark Varg, and most other e-motos. Black or red, sold as a pair.\u003c\/p\u003e\n\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWaffle pattern - deep grip under gloves.\u003c\/li\u003e\n  \u003cli\u003eSofter compound than stock - built-in absorption takes the sting out of bumps and holds comfort on long rides.\u003c\/li\u003e\n  \u003cli\u003e115mm length - full coverage for your whole hand.\u003c\/li\u003e\n  \u003cli\u003e7\/8 inch inside diameter on the clutch side - slides onto the stock bar.\u003c\/li\u003e\n  \u003cli\u003e1 inch inside diameter on the throttle side - slides onto the stock throttle tube, no trimming.\u003c\/li\u003e\n  \u003cli\u003eClosed ends - trim the end cap to run bar-end weights.\u003c\/li\u003e\n  \u003cli\u003ePush-on install - grip glue recommended so the grips never twist.\u003c\/li\u003e\n  \u003cli\u003eSold as a pair - one clutch-side grip, one throttle-side grip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFits these models:\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSurron Light Bee (\u003cstrong\u003eall years\u003c\/strong\u003e; also sold as Segway X160 \/ X260)\u003c\/li\u003e\n  \u003cli\u003eSurron LB2\u003c\/li\u003e\n  \u003cli\u003eSurron Ultra Bee\u003c\/li\u003e\n  \u003cli\u003eSurron Hyper Bee\u003c\/li\u003e\n  \u003cli\u003eTalaria X3\u003c\/li\u003e\n  \u003cli\u003eTalaria MX3\u003c\/li\u003e\n  \u003cli\u003eTalaria MX4\u003c\/li\u003e\n  \u003cli\u003eTalaria MX5\u003c\/li\u003e\n  \u003cli\u003eEride Pro S\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 2.0\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 3.0\u003c\/li\u003e\n  \u003cli\u003eEride Pro SS 4.0\u003c\/li\u003e\n  \u003cli\u003eEride Pro SR\u003c\/li\u003e\n  \u003cli\u003eEride Pro Mini\u003c\/li\u003e\n  \u003cli\u003eStark Varg MX\u003c\/li\u003e\n  \u003cli\u003eStark Varg EX\u003c\/li\u003e\n  \u003cli\u003eStark Varg SM\u003c\/li\u003e\n  \u003cli\u003eTuttio Soleil 01\u003c\/li\u003e\n  \u003cli\u003eStrike Shadow\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10\u003c\/li\u003e\n  \u003cli\u003eYozma IN 10 PRO\u003c\/li\u003e\n  \u003cli\u003eYozma IN 11\u003c\/li\u003e\n  \u003cli\u003eValtinsu EM-5\u003c\/li\u003e\n  \u003cli\u003eValtinsu EM-5 PRO\u003c\/li\u003e\n  \u003cli\u003eSRPNT X3\u003c\/li\u003e\n  \u003cli\u003eSRPNT X8\u003c\/li\u003e\n  \u003cli\u003eSRPNT Z27\u003c\/li\u003e\n  \u003cli\u003eETM RTR Lite, Sport, and Alpha\u003c\/li\u003e\n  \u003cli\u003eRawr Mantis X\u003c\/li\u003e\n  \u003cli\u003eMacfox X1\u003c\/li\u003e\n  \u003cli\u003eMacfox X1S\u003c\/li\u003e\n  \u003cli\u003eMacfox X2\u003c\/li\u003e\n  \u003cli\u003eMacfox X7\u003c\/li\u003e\n  \u003cli\u003eRidstar Q20\u003c\/li\u003e\n  \u003cli\u003eRidstar Q20 Pro\u003c\/li\u003e\n  \u003cli\u003eRidstar E26\u003c\/li\u003e\n  \u003cli\u003eZooz Ultra Urban\u003c\/li\u003e\n  \u003cli\u003eFreego X1\u003c\/li\u003e\n  \u003cli\u003eFreego X2 Pro\u003c\/li\u003e\n  \u003cli\u003eFreego X3 Pro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso fits any dirt bike with a \u003cstrong\u003e7\/8 inch bar and a 1 inch throttle tube\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eDoes NOT fit: Super73.\u003c\/p\u003e\n\n\u003ch2\u003eSurron Waffle Grips FAQ\u003c\/h2\u003e\n\u003ch3\u003eWill these fit my bike?\u003c\/h3\u003e\n\u003cp\u003eYes, if your bike runs a standard 7\/8 inch bar and a 1 inch throttle tube. That covers every bike listed above, plus most dirt bikes. The Super73 is the exception.\u003c\/p\u003e\n\n\u003ch3\u003eWhy are the two grips different sizes?\u003c\/h3\u003e\n\u003cp\u003eThe clutch-side grip goes straight on the bar, so it measures 7\/8 inch inside. The throttle-side grip rides on the throttle tube, which is larger, so it measures 1 inch inside.\u003c\/p\u003e\n\n\u003ch3\u003eHow do they compare to stock grips?\u003c\/h3\u003e\n\u003cp\u003eSofter and grippier. The compound absorbs the small hits that numb your hands on stock grips, and the difference shows up on long rides. The waffle pattern keeps a solid hold through gloves.\u003c\/p\u003e\n\n\u003ch3\u003eCan I run bar-end weights?\u003c\/h3\u003e\n\u003cp\u003eYes. The ends ship closed. Trim the end cap off with a sharp blade and the bar end bolts through.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I install them?\u003c\/h3\u003e\n\u003cp\u003eCut or pull off the old grips and clean the bar and throttle tube. Add a thin coat of grip glue, slide each grip on, and let it set before riding.\u003c\/p\u003e\n\n\u003ch3\u003eWhat comes in the box?\u003c\/h3\u003e\n\u003cp\u003eOne pair of grips: one clutch-side grip and one throttle-side grip. Grip glue is not included.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eShips from USA!\u003c\/strong\u003e\u003c\/p\u003e","brand":"FactoryZ","offers":[{"title":"Black","offer_id":60377112903966,"sku":"WAFLE-GRIPS-BLACK","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Big Tonk Red","offer_id":60377112936734,"sku":"WAFFLE-GRIPS-RED","price":19.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":60901816369438,"sku":"WAFFLE-GRIPS-WHITE","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/files\/surron-grips-waffle-black-angled.webp?v=1792424579"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0738\/7548\/9054\/collections\/etm-rtr-lite-teal-green.webp?v=1790388920","url":"https:\/\/factoryz.co\/collections\/etm-rtr-parts.oembed","provider":"FactoryZ","version":"1.0","type":"link"}